Degradation Products Research Articles

Pilot Plant Approach Combining Photocatalysis and Adsorption for Antibiotics Removal from Slaughterhouse and Urban Wastewater Treatment Plant Effluents

The main objective of this research is to perform a real case-study of antibiotic decontamination from real slaughterhouse and wastewater effluents by applying a sequential treatment of TiO2/UV-vis photocatalysis and adsorption. More precisely, the removal of five classes of antibiotics: enrofloxacin, sulfadiazine, trimethoprim, azithromycin, amoxicillin and amoxicillin degradation products was studied in an 80L/h photocatalytic and adsorption pilot-scale plant over multiple cycles, operating in semi-continuous mode. The results exhibited significant removal rates, ranging from 77-100% for the slaughterhouse effluent, and 61-89% for the wastewater treatment plant effluent, thus demonstrating that the treatment is more effective when it is applied directly in the emission source, previous to antibiotic dilution in the municipal collector. Using the two processes sequentially results in greater efficiency than when they are used in isolation. After photocatalysis, antibiotic degradation products are easily adsorbed, since they have more affinity for the adsorbent, and the presence of competing compounds decreases considerably. After applying several cycles of treatment, the adsorption performance remains almost constant. By contrast, the photocatalysis performance decreased, which was attributed to catalyst agglomeration determined by Asymmetric Flow Field-Flow Fractionation (AF4) coupled with Dynamic Light Scattering (DLS) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS).

A New Risk Prediction Model for Detecting Endoscopic Activity of Ulcerative Colitis.

: Ulcerative colitis (UC) is an incurable, relapsing-remitting inflammatory disease that increases steadily. Mucosal healing has become the primary therapeutic objective for UC. Nevertheless, endoscopic assessments are invasive, expensive, time-consuming, and inconvenient. Therefore, it is crucial to develop a noninvasive predictive model to monitor endoscopic activity in patients with UC. : Clinical data of 198 adult patients with UC were collected from January 2016 to August 2022 at Huadong Hospital, China. : Patients with UC were randomly divided into the training cohort (70%, n=138) and the validation cohort (30%, n=60). The receiver operating characteristic curve value for the training group was 0.858 (95% confidence interval [CI], 0.781 to 0.936), whereas it was 0.845 (95% CI, 0.731 to 0.960) for the validation group. The calibration curve employed the Hosmer-Lemeshow test (p>0.05) to demonstrate the consistency between the predicted and the actual probabilities in the nomogram of these two groups. The decision curve analysis validated that the nomogram had clinical usefulness. : The nomogram, which incorporated activated partial thromboplastin time, fecal occult blood test, β2-globulin level, and fibrinogen degradation products, served as a prospective tool for evaluating UC activity in clinical practices.

Boosting Efficiency in Piezo-Photocatalysis Process Using Poled Ba0.7Sr0.3TiO3 Nanorod Arrays for Pollutant Degradation and Hydrogen Production.

Recently, the combination of the piezoelectric effect in the photocatalytic process, referred to as piezo-photocatalysis, has gained considerable attention as a promising approach for enhancing the degradation of organic pollutants. In this investigation, we studied the piezo-photocatalysis by fabricating arrays of barium strontium titanate (Ba0.7Sr0.3TiO3) nanorods (BST NRs) on a glass substrate as recoverable catalysts. We found that the degradation rate constant k of the rhodamine B solution achieved 0.0447 min-1 using poled BST NRs in the piezo-photocatalytic process, indicating a 2-fold increase in efficiency compared to the photocatalytic process (0.00183 min-1) utilizing the same material. This is mainly ascribed to the generation of the piezopotential in the poled BST NRs under ultrasonic vibration. Moreover, the BST NR array demonstrated a hydrogen (H2) production rate of 411.5 μmol g-1 h-1. In the photoelectrochemical process, the photocurrent density of poled BST NRs achieved 1.97 mA cm-2 at an applied potential of 1.23 V (ERHE (reversible hydrogen electrode)) under ultrasonic vibrations, representing a 1.7-fold increase compared with the poled BST NRs without ultrasonic vibrations. The measurement results from the liquid chromatograph mass spectrometer (LC-MS) demonstrated the formulation of a degradation pathway for rhodamine B molecules. Moreover, ab initio molecular dynamics (AIMD) simulation results demonstrate the dominance of hydroxyl radicals (•OH) rather than superoxide radicals (•O2-) in the degradation process. This study not only benefits the understanding of the principle of the piezo-photocatalytic process but also provides a new perspective for improving the catalytic efficiency for organic pollutants degradation.

Radiation-Induced Defects in Uranyl Trinitrate Solids.

Actinides are inherently radioactive; thus, ionizing radiation is emitted by these elements can have profound effects on its surrounding chemical environment through the formation of free radical species. While previous work has noted that the presence of free radicals in the system impacts the redox state of the actinides, there is little atomistic understanding of how these metal cations interact with free radicals. Herein, we explore the effects of radiation (UV and γ) on three U(VI) trinitrate complexes, M[UO2(NO3)3] (where M = K+, Rb+, Cs+), and their respective nitrate salts in the solid state via electron paramagnetic resonance (EPR) and Raman spectroscopy paired with Density Functional Theory (DFT) methods. We find that the alkali salts form nitrate radicals under UV and γ irradiation, but also note the presence of additional degradation products. M[UO2(NO3)3] solids also form nitrate radicals and additional DFT calculations indicate the species corresponds to a change from the bidentate bound nitrate anion into a monodentate NO3• radical. Computational studies also highlight the need to include the second sphere coordination environment around the [UO2(NO3)3]0,1 species to gain agreement between the experimental and predicted EPR signatures.

Development of a stability indicating high-performance liquid chromatography method for determination of cenobamate: study of basic degradation kinetics

This study presents a stability indicating high-performance liquid chromatography HPLC method for the determination of cenobamate (CNB) in presence of its main impurity (CNB H-impurity) and degradation products. The chromatographic separation was carried out on a Thermo BDS Hypersil-C18 column (150 × 4.6 mm; 5 μm) with a mobile phase consisting of a 50:50 (%v/v) ratio of methanol and purified water. The flow rate was maintained at 1.0 mL. min− 1. CNB was detected at 210 nm using a PDA detector. The column temperature was held at 40 °C.The retention time of the drug was found to be 3.2 min. Furthermore, the study investigates the degradation behavior of CNB under various stress conditions, including acidic, basic, oxidative, and light-induced degradation. The results indicate that CNB is particularly susceptible to basic degradation. Consequently, a comprehensive study of the basic degradation kinetics was conducted. The method was also successfully applied for the determination of CNB in its dosage form. The results also show that there is no co-elution from degradation products or excipients as indicated by the mass balance and peak purity values confirming the specificity of the proposed method and its applicability for routine analysis of CNB.

Identification and structural characterization of potential degradation products of baricitinib using liquid chromatography combined with quadrupole time-of-flight mass spectrometry

AbstractBaricitinib (BRT) is a drug substance with potent anti-inflammatory activity indicated in rheumatoid arthritis, atopic dermatitis, severe alopecia areata and recently for the treatment of Covid-19. Process impurities of the drug during its formulation are quite known, however studies regarding its degradation products (DPs) under stress conditions are limited. In this study, the drug was subjected to forced degradation under various degradation conditions, including acidic hydrolysis, alkaline hydrolysis, oxidative and thermal, to determine its inherent stability. To this purpose, a novel HPLC method was developed for the determination of degradation impurities of BRT. Alkaline hydrolysis test showed a selectivity towards breaking C–C bonds. This resulted to five DPs formed by chain scission reactions occurred at the pyrrolo-pyrimidine group between C6–C10 and C8–C9. Also, the ethylsulfonyl-azetidin-ylidene group was subjected to C–C bond cleavage at C12–C15 and C16–C18. Degradation products were further characterized with the use of liquid chromatography quadrupole time of flight tandem mass spectrometry (LC-Q-TOF-MS/MS).

The Impact of Different Drying Methods on the Metabolomic and Lipidomic Profiles of Arthrospira platensis

Drying is an inseparable part of industrial microalgae production. In this work, the impacts of eight different drying methods on the metabolome and lipidome of Arthrospira platensis were investigated. The studied drying methods were freeze drying (FD), sun drying (SD), air drying at 40 and 75 °C (AD′ and AD″), infrared drying at 40 and 75 °C (IRD′ and IRD″), and vacuum drying at 40 and 75 °C (VD′ and VD″). Results gathered by reversed-phase liquid chromatography separation coupled with high-resolution tandem mass spectrometry with electrospray ionization (RP-LC-ESI-Orbitrap HRMS/MS) analysis allowed researchers to identify a total of 316 metabolites (including lipids) in aqueous and ethanolic extracts. The compounds identified in ethanolic extracts were mainly lipids, such as neutral and polar lipids, chlorophylls and carotenoids, while the compounds identified in the aqueous extracts were mainly amino acids and dipeptides. Among the identified compounds, products of enzymatic and chemical degradation, such as pyropheophytins, monoacylglycerols and lysophosphatidylcholines were also identified and their amounts depended on the drying method. The results showed that except for FD method, recognized as a control, the most protective method was AD′. Contrary to this, VD′ and VD″, under the conditions used, promoted the most intense degradation of valuable metabolites.

A cellulosomal yeast reaction system of lignin-degrading enzymes for cellulosic ethanol fermentation.

Biofuel production from lignocellulose feedstocks is sustainable and environmentally friendly. However, the lignocellulosic pretreatment could produce fermentation inhibitors causing multiple stresses and low yield. Therefore, the engineering construction of highly resistant microorganisms is greatly significant. In this study, a composite functional chimeric cellulosome equipped with laccase, versatile peroxidase, and lytic polysaccharide monooxygenase was riveted on the surface of Saccharomyces cerevisiae to construct a novel yeast strain YI/LVP for synergistic lignin degradation and cellulosic ethanol production. The assembly of cellulosome was assayed by immunofluorescence microscopy and flow cytometry. During the whole process of fermentation, the maximum ethanol concentration and cellulose conversion of engineering strain YI/LVP reached 8.68g/L and 83.41%, respectively. The results proved the availability of artificial chimeric cellulosome containing lignin-degradation enzymes for cellulosic ethanol production. The purpose of the study was to improve the inhibitor tolerance and fermentation performance of S. cerevisiae through the construction and optimization of a synergistic lignin-degrading enzyme system based on cellulosome.

Hydrogenolysis of Poly(Ethylene-co-Vinyl Alcohol) and Related Polymer Blends over Ruthenium Heterogeneous Catalysts.

The hydrogenolysis of polymers is emerging as a promising approach to deconstruct plastic waste into valuable chemicals. Yet, the complexity of plastic waste, including multilayer packaging, is a significant barrier to handling realistic waste streams. Herein, we reveal fundamental insights into a new chemical route for transforming a previously unaddressed fraction of plastic waste - poly(ethylene-co---vinyl alcohol) (EVOH) and related polymer blends - into alkane products. We report that Ru/ZrO2 is active for the concurrent hydrogenolysis, hydrogenation, and hydrodeoxygenation of EVOH and its thermal degradation products into alkanes (C1-C35) and water. Detailed reaction data, product analysis, and catalyst characterization reveal that the in-situ thermal degradation of EVOH forms aromatic intermediates that are detrimental to catalytic activity. Increased hydrogen pressure promotes hydrogenation of these aromatics, preventing catalyst deactivation and improving alkane product yields. Calculated apparent rates of C-C scission reveal that the hydrogenolysis of EVOH is slower than low-density polyethylene. We apply these findings to achieve hydrogenolysis of EVOH/polyethylene blends and elucidate the sensitivity of hydrogenolysis catalysts to such blends. Overall, we demonstrate progress towards efficient catalytic processes for the hydroconversion of waste multilayer film plastic packaging into valuable products.

Cellulosic fibers spun from stabilized imidazolium ionic liquids: identification of chromophores in the fibers after accelerated ageing

AbstractCellulosic fibers spun from 1,3-dialkylimidazolium ionic liquids are effectively stabilized against cellulose degradation by the addition of antioxidants, but this protective effect comes at the expense of chromophore generation from the degradation products of the stabilizers. In this study, we identified the oxidation and degradation products of four natural antioxidants, α-tocopherol, N-methyl-α-tocopheramine, propyl gallate, and hydroxytyrosol, formed upon accelerated ageing of the fibers. Ageing was performed according to standard protocols under either dry or moist conditions and the extraction was done with supercritical carbon dioxide. Chromophore formation in spinning dope, upon dry ageing and moist ageing were compared. In total, 16 different oxidation/degradation products were isolated, their structure confirmed by comprehensive analytical characterization with full NMR resonance assignment in the 1H and 13C domains as well as by comparison with authentic samples, and their formation pathways discussed. Knowledge of the chemical structures of the degradation products originating from the stabilizers now provides a good starting point for optimization of the fiber bleaching stage. Graphical abstract

Identification of β-aspartic semialdehyde and homocysteine as major reaction products of riboflavin-sensitized photooxidation of peptide-bound methionine

AbstractMethionine is an essential amino acid for mammals and it is limiting for monogastric animals. It can be oxidized easily by UV light. This could influence the bioaccessibility and bioavailability of methionine. In this work, the photosensitized degradation of peptide-bound methionine in the presence of riboflavin was investigated in a model system. Capillary electrophoresis was employed to analyze the time course of the degradation. The products were identified by liquid chromatography coupled to mass spectrometry (LC–MS/MS). Benzoyl methionine was degraded by 50% during UV irradiation in the presence of riboflavin after 5.0 min with 10 mol% riboflavin and 6.4 min with 3 mol% riboflavin. Homocysteine (16–20 mol%) and β-aspartic semialdehyde (ca. 30 mol%) were found as major degradation products next to methionine sulfoxide (ca. 25 mol%). A smaller molar ratio of riboflavin led to a higher formation of aspartic semialdehyde. The formation of homocysteine was paralleled by the formation of formaldehyde. Furthermore, the experiment was transferred to small peptides, which showed the analogous degradation products of peptide-bound methionine.

Enhancing Disease Diagnosis: Statistical Analysis of Haematological Parameters in Sickle Cell Patients, Integrating Predictive Analytics

Sickle cell disease (SCD) affects 30 million people worldwide, causing a range of symptoms from mild to severe, including Vaso occlusive crises (VOC). SCD leads to damaging cycles of sickling and desickling of red blood cells due to HbS polymer formation, resulting in chronic haemolytic anaemia and tissue hypoxia. We propose using machine learning to categorize SCD patients based on haemoglobin, reticulocyte count, and LDH levels, crucial markers of hemolysis. Statistical analysis, particularly Linear Regression, demonstrates how haemoglobin depletion occurs using LDH and reticulocyte parameters.
 Bilirubin and haemoglobin, two integral biomarkers in clinical biochemistry and haematology, serve distinct yet interconnected roles in human physiology. Bilirubin, a product of heme degradation, is a critical indicator of liver function and various hepatic disorders, while haemoglobin, found in red blood cells, is responsible for oxygen transport throughout the body. Understanding the statistical relationship between these biomarkers has far-reaching clinical implications, enabling improved diagnosis, prognosis, and patient care. This research paper conducts a comprehensive statistical analysis of bilirubin and haemoglobin using various regression techniques to elucidate their intricate association. The primary objective of this study is to characterize the relationship between bilirubin and haemoglobin. Through meticulous data analysis, we explore whether these biomarkers exhibit positive, negative, or no correlation. Additionally, this research develops predictive models for estimating haemoglobin levels based on bilirubin data, offering valuable tools for healthcare professionals in clinical practice.

Validation, measurement uncertainty estimation and evaluation of UHPLC greenness for simultaneous determination of metoprolol tartrate and hydrochlorothiazide in binary tablet

A novel green ultra high performance liquid chromatography (UHPLC) method was validated and estimated the measurement uncertainty for simultaneous determination of metoprolol tartrate (MET) and hydrochlorothiazide (HCT) in binary tablet. A Zorbax® SB-C18 column with isocratic elution (flow rate 0.9 mL min−1) at 25°C was used. Analytes and HCT degradation product were separated in approximately 1 min using acetonitrile:water:triethylamine (17:83:0.2, v/v) as mobile phase. Analytical curves were linear with (R 2 > 0.99 for MET and HCT)  with detection limits of 2.42 and 1.05 µg mL−1 for MET and HCT, respectively.  Precision measurements showed RSD% from 0.39 to 1.2% and method accuracy by recovery tests was 100 ± 2%. Measurement uncertainties using Eurachem procedure were 100.1 ± 2.8% and 100.3 ± 2.4% for MET and HCT, respectively. This UHPLC method was accurate, precise, linear and selective, making it suitable for pharmaceutical quality control. It also proved eco-friendly compared to other reported methods.

Recent Progress in Intestinal Toxicity of Microplastics and Nanoplastics: Systematic Review of Preclinical Evidence

The tremendous plastic production and poor post-use management are current and future sources of environmental and human contamination due to their degradation products: microplastics and nanoplastics (MNPLs). Methodological developments have allowed MNPLs to be detected in an increasing variety of human foods, as well as in stool and colonic mucosa. It was suggested early that the direct contact between MNPLs and intestinal tissues could represent a potential risk for human health. In order to assess this, over the last 3 years, numerous studies have evaluated the impact of MNPL ingestion on intestinal homeostasis in rodents. This comprehensive review reports the preclinical studies published between January 2021 and January 2024, and analyzes their contributions as well as their shortcomings. It shows that evidence is accumulating of the intestinal toxicity of spherical MNPLs, which lead to pro-inflammatory, pro-oxidative, barrier-disruptive and dysbiotic effects. However, the available literature has addressed only a minor part of the potential health issues of MNPLs. Many parameters contributing to MNPL toxicity need to be better taken into account in future studies. Particular attention should be paid to improve the representativeness of MNPLs, as well as to better consider the susceptibility factors of MNPL toxicity, generated especially by an underlying pathology or pathological imprinting.

Tolvaptan therapy for edema in patients with chronic kidney disease.

Tolvaptan is a vasopressin V2 receptor antagonist that is commonly prescribed to alleviate edema associated with renal diseases. However, the clinical benefits of tolvaptan in chronic kidney disease (CKD) remain unclear. This study aimed to evaluate the effectiveness of tolvaptan in managing edema caused by CKD. The efficacy and treatment regimen of tolvaptan were assessed in a cohort of 96 patients with renal edema and CKD. During the treatment, the patients' creatinine (CR), uric acid (UA), and estimated glomerular filtration rate (eGFR) were monitored as important indicators of kidney function. Coagulation-associated molecules including fibrinogen, D-dimer, and fibrin degradation products (FDPs) were measured. Electrolyte disorders and acute kidney injury were closely monitored. Tolvaptan was administered at a daily dose of 7.5 mg, and 30 mg of edoxaban was administered to manage deep vein thrombosis. During the course of tolvaptan therapy, the eGFR of the patients was not declined. Edema was eliminated in 82.18% of patients. Proteinuria was reduced in the patients (p<0.05). There were no significant changes in serum sodium levels throughout treatment, and no significant difference was observed in blood volume between the end of treatment and baseline levels. Importantly, acute kidney injury did not occur, and renal edema and deep vein thrombosis were successfully treated. As long as a rational treatment regimen is followed, tolvaptan is a safe and effective diuretic for treating edema in CKD, even in the late stages of CKD without reducing residual renal function in the patients.

A Crucial Role of Proteolysis in the Formation of Intracellular Dinitrosyl Iron Complexes.

Dinitrosyl iron complexes (DNICs) stabilize nitric oxide in cells and tissues and constitute an important form of its storage and transportation. DNICs may comprise low-molecular-weight ligands, e.g., thiols, imidazole groups in chemical compounds with low molecular weight (LMWDNICs), or high-molecular-weight ligands, e.g., peptides or proteins (HMWDNICs). The aim of this study was to investigate the role of low- and high-molecular-weight ligands in DNIC formation. Lysosomal and proteasomal proteolysis was inhibited by specific inhibitors. Experiments were conducted on human erythroid K562 cells and on K562 cells overexpressing a heavy chain of ferritin. Cell cultures were treated with •NO donor. DNIC formation was monitored by electron paramagnetic resonance. Pretreatment of cells with proteolysis inhibitors diminished the intensity and changed the shape of the DNIC-specific EPR signal in a treatment time-dependent manner. The level of DNIC formation was significantly influenced by the presence of protein degradation products. Interestingly, formation of HMWDNICs depended on the availability of LMWDNICs. The extent of glutathione involvement in the in vivo formation of DNICs is minor yet noticeable, aligning with our prior research findings.

HPLC–UV Monitored Photostability-Test of LE404 and Identification of the Degradation Products via NMR and LC–HRMS

HPLC–UV Monitored Photostability-Test of LE404 and Identification of the Degradation Products via NMR and LC–HRMS

Photochemical fate of β-blocker pindolol in riverine and its downstream coastal waters

Pindolol (PIN) is a commonly used β-blocker drug and has been frequently detected in various natural waters. Comprehensive understanding of its environmental photochemical transformation is necessary to assess its environmental risk. In this study, the photodegradation kinetics and mechanisms of PIN in both freshwater and coastal water were investigated for the first time. The photodegradation experiments were carried out by steady-state photochemical experiment under simulated sunlight irradiation. The results showed that the photodegradation rate of PIN in the freshwater of the Pearl River estuary was significantly faster than that in its downstream coastal water. In river water, PIN can undergo both direct photolysis and indirect photolysis induced by riverine dissolved organic matter (DOM) mainly through excited triplet-state of DOM and singlet oxygen, while direct photolysis dominated its degradation in coastal water. The promotion effect was found to be much greater for Suwannee River Natural Organic Matter (SRNOM) than that of the sampled riverine DOM, due to its high steady-state concentrations of reactive species. Interestingly, coastal DOM in northern and southern China were found to have similar promotion effects on PIN photodegradation for the first time, but both less than that of riverine DOM. A total of seven degradation products of PIN resulting from hydroxylation, hydrogen abstraction and cleavage of ether bond were identified. Biological toxicity of one products were found to be higher than that of PIN. These results are of significance for knowing the persistence and ecological risk of PIN in natural waters.

On the Chemical Pathways Influencing the Effective Global Warming Potential of Commercial Hydrofluoroolefin Gases.

The enforcement of a global hydrofluorocarbon (HFC) refrigerant phase down led to the introduction of hydrofluoroolefins (HFOs) as a low Global Warming Potential (GWP) substitute, given their low atmospheric lifetime. However, to this date it is not fully clear the long-term atmospheric fate of HFOs primary degradation products: trifluoro acetaldehyde (TFE), trifluoro acetyl fluoride (TFF), and trifluoroacetic acid (TFA). It particularly concerns the possibility of forming HFC-23, a potent global warming agent. Although the atmospheric reaction networks of TFE, TFF, and TFA have a fair level of complexity, the relevant atmospheric chemical pathways are well characterized in the literature, enabling a comprehensive hazard assessment of HFC-23 formation as a secondary HFO breakdown product in diverse scenarios. A lower bound of the HFOs effective GWP in a baseline scenario is found above regulatory thresholds. While further research is crucial to refine climate risk assessments, the existing evidence suggests a non-negligible climate hazard associated with HFOs.

Renewable Energy Potential: Second-Generation Biomass as Feedstock for Bioethanol Production.

Biofuels are clean and renewable energy resources gaining increased attention as a potential replacement for non-renewable petroleum-based fuels. They are derived from biomass that could either be animal-based or belong to any of the three generations of plant biomass (agricultural crops, lignocellulosic materials, or algae). Over 130 studies including experimental research, case studies, literature reviews, and website publications related to bioethanol production were evaluated; different methods and techniques have been tested by scientists and researchers in this field, and the most optimal conditions have been adopted for the generation of biofuels from biomass. This has ultimately led to a subsequent scale-up of procedures and the establishment of pilot, demo, and large-scale plants/biorefineries in some regions of the world. Nevertheless, there are still challenges associated with the production of bioethanol from lignocellulosic biomass, such as recalcitrance of the cell wall, multiple pretreatment steps, prolonged hydrolysis time, degradation product formation, cost, etc., which have impeded the implementation of its large-scale production, which needs to be addressed. This review gives an overview of biomass and bioenergy, the structure and composition of lignocellulosic biomass, biofuel classification, bioethanol as an energy source, bioethanol production processes, different pretreatment and hydrolysis techniques, inhibitory product formation, fermentation strategies/process, the microorganisms used for fermentation, distillation, legislation in support of advanced biofuel, and industrial projects on advanced bioethanol. The ultimate objective is still to find the best conditions and technology possible to sustainably and inexpensively produce a high bioethanol yield.